Stainless steel potato chips fried food deoiling machine/oil-water separator

Dehydrator and De-oiling machine mainly consists of motor, centrifugal system, screen basket filter, transmission system, electric control device component.

There is a Shock system, the filter will not shake the sieve basket, within dewatering process.

After the completion of dewatering an electromagnetic brake, the entire operation will not cause material damage due to equipment vibration.

Centrifugal principle, electromagnetic brake, automatic digital control, SUS304 stainless steel.

Dehydrator and De-oiling machine is using the principle of centrifugal machinery, electromagnetic brakes, automatic digital control, high-speed rotation of the inner cylinder through the oil throw to, and collection device.

Precision measurement, stable operation, speed can be de-oiling was selected, in line with the centrifugal effect.

Dehydrator and De-oiling machine is the most advanced fried food and puffed food oil removal equipment currently, it is not only the first choice for fried food and puffed food, but also for the work of dehydrated food, fruits and vegetables after washing, not only fast on the water and the oil products emerge, but also greatly save the cost of oil and water.

Starting clutch, easy to accelerate, prolong the service life of the motor.

Periodic inspection equipment all parts of the bolts are loose, regular lubrication, note the extent of the belt tensioner.

This equipment shall feed in a stationary state, prohibits the examination in the boot state, if abnormal, should wait until after the device is completely stopped before proceeding to the inspection and maintenance.

This equipment should be operated at low speed (2-3 rpm), the uniform feeding, to ensure removal of oil cylinder balance object.

Hydraulic oil system, the choice of a viscosity of 15-68 CST hydraulic oil clean and free of impurities, it is recommended to use hydraulic oil No. N46.

The system uses the first 100 hours, the hydraulic oil should be replaced after every 3,000 hours to replace a hydraulic oil.

There are should not pile up other debris around the machine, should be kept clean, and have adequate lighting.

Model

Barrel diameter (mm)

Power (kw)

Capacity (kg/time)

Dimension

(mm)

Weight (kg)

JS-TYJ-400

400

0.75

5-10

900*550*750

250

JS-TYJ-500

500

1.1

15-20

1080*650*700

300

JS-TYJ-600

600

1.5

25-30

1180*750*930

400

JS-TYJ-800

800

2.2

40-50

41300*820*700

450