waste oil refinery equipment

Product Category

PRODUCT CATEGORIES

ZSA-30 Product Description

waste oil refinery equipment

Do not need acid and clay, get high quality base oil : No unsaturated composition, can storage in a long-term without change its color, also no any bad smell.

Product details

Color index	1.6~1.2
Viscosity(40℃)	20-70
Appearance	Transparency
Water content	≤0.05
Product Keywords	oil refining equipment and waste oil refinery

Features:

ZSA series waste oil refinery equipment

overview :This machine can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through waste oil refinery equipment distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production.

Systems of equipment

1 Pretreatment system:Waste oil will be pumped into the distillation kettle after pretreated.

2 Distillation system: through burning coal,gasor fuel oil to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system.

3 Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel.

4 Oil storage system: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank.

5 waste oil refinery equipment system: meet the technology requirement.

6 Filtration system: rapidly filter out mechanical impurities in the base oil, gasoline and diesel, get the high quality base oil, gasoline and diesel.

Recovery rate

Base oil: 85%~88 %( index same as SN150~SN200)

Gasoline: about 3%

Diesel: about 3%-4%

Oil residue: 6%~8%

Index of oil after treatment

No	Item	Unit	Technical data
			Light base oil	Medium/heavy base oil
1	Viscosity(40℃)	mm2/s	16~32	28~72
2	Viscosity index		≥99	110
3	Appearance		Transparency	Transparency
4	Color index	ASTMD1500	≤1.2	≤1.6
5	Pour point	℃	-15	-10
6	Water content	%W/W	≤0.05	≤0.05
7	Flash point open	℃	≥180	≥210
8	Ash content	%W/W	0.005	0.005
9	Carbon residue	%W/W	≤0.13	≤0.13
10	Corrosioncopper,100℃3h		Qualified	Qualified
11	Acidity	mgKOH/g	≤0.05	≤0.05

performance characteristics,advantage introduction

1 widely usage: can treat gasoline engine oil, diesel engine oil, rubber oil, waste oils and other various cleaning oil

2 low processing costs: the total cost of processing one ton used oil only USD30(including fuel, electricity and pretreatment agent)

3 high recovery rate: base oil:85%~88%,gasoline 3%,diesel:3%~4%,oil residue:6%~8%

Current the continuous operation practices in the market, while the good oil come out, at the same time pump waste oil in. This operation is complicated,labor-intensive,and a lot of good oil will be pumped as residue oil , the yield at most up to 72% ,too much residue oil.

4 Do not need acid and clay, get high quality base oil : No unsaturated composition, can storage in a long-term without change its color, also no any bad smell.

5 environmental protection: the whole process is all sealed, won’t release any gas harmful to human and environment, the colloid and asphalting, carbon black in the waste lube oil are all into sludge, can be used as asphalt or fuel.

6 this machine use a special way heating, high thermal efficiency, and difficult to form carbon fouling.safe,reliable,durable.this is the most advanced technology in the world and suitable for large-scale industrial production.

7 easy operation, low labor intensity, only 1 to 2 workers can easily operate the machine.

Quality assurance:

1, product quality assurance for one year, any non-artificial damage, shall be the responsibility of the manufacturer.
2, the manufacturers provide overseas engineers, door-to-door guidance, installation and use.

Company Information

ABOUT US

Chongqing Junneng Machine Manufacturing Co., ltd. established in 2009, is a professional manufacturer engaged in the research, development, production, sale and service of waste oil recycling machine. We are located in Chongqing, China, with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure customer satisfaction. We produce and sell variety waste oil refinery equipment oil purifiers, including Z L A series insulation oil purifiers, R Z L series lubricant oil purifiers, T Z L series turbine oil purifiers, KL series fire-resistant oil purifiers, TLA series light fuel oil purifiers, Z S C waste oil machines through physical chemical ways to get base oil and JL(LY) series portable oil purifier. In recent years we also successfully researched and developed two series waste engine oil recycling equipment: J N C series waste oil recycling to diesel equipment through catalytic distillation and Z S A series waste oil recycling to base oil equipment through waste oil refinery equipment distillation. Both of them don’t need sulfuric acid and clay, the output oil after treated will be exactly the same as brand new oil. In addition, we have obtained CE certificates. Our products exported to clients in such regions as North America, Europe, Southeast Asia, Africa, waste oil refinery equipmentia and East Asia. We are looking forward to cooperate with new and old customers from domestic and overseas market. Believe us, believe your choice.

Packaging & Shipping

PACKAGE:

Meet the export transport requirements

DELIVERY TIME:

35-40 days after confirming order,detail delivery date should be decided according to
production season and order quantity.

Contact Us

Tel: (0086)68932898
waste oil refinery equipment 975406651
waste oil refinery equipment 18502396226
waste oil refinery equipment: 18502396226
Add: Room 6-1,Unit 1,Building 8,Jinyujiangzhou,NO 63,Bo Qiao Road,Jianqiao Ave,Dadukou District ,Chongqing ,China

Certifications

CERTIFICATE

All our products are passed the inspection standards included SGS,BV,CE with 100% quality.

Jinan Joysun Machinery Co., Ltd. est une grande entreprise par actions, axée sur la production d'waste oil refinery equipment, intégrée à la recherche scientifique, à la production et aux ventes. La société est située dans la zone industrielle de Shandong salut-technologie, couvre une superficie de 50.000 mètres carrés, avec 15.000 mètres carrés deux standard usine industrielle lourde, plus de 160 ensembles toutes sortes de traitement des métaux de grande et moyenne taille, soudage, équipement d'assemblage .Jinan Joysun Machinery Co., Ltd. attache une grande importance aux échanges techniques et à la coopération internationale, a présenté la technologie de pointe sur et artisanat des États-Unis, Allemagne, Australie et autres pays, établit les lignes de production avancées internationales AAAA et base d'essai moderne de première classe.
Jinan Joysun Machinery Co., Ltd. basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais 9999999 techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.