Environmental Refinery Equipment using waste oil

the technical speciality:

Waste Oil Recycling Machine is mainly used to extract high quality oil from the used mineral oil.

Comparing with the tube type model XHZTseries, the daily output of the series of model XHZT would slightly less than XHZT series. But it not needs to dehydrate first, the process of the dehydration and refining are in the same process in the furnaces. By means of oil-water seperator, the oil and water would be seperated and the extracting process goes on continuously

our main features

a. The complete set of unit produces no smoke and smell with favourable effects of

environmental protection.

b. The pressure release device operates through water circulation, which greatly im

proves the security of the system.

c. The release of pressure during the production dramatically increases the output

within certain time and meanwhile improves the quality of oil.

d. The heating system adopts hot air heating technology, which improves the safety

performance of production and heating efficiency.

e. High efficiency fuel gas heating system. When the heated gas reaches 150 during

refining, a large amount of gas will be generated: through methane to butane, which

cannot be liquefied under normal temperature. A large quantity of energy will be gen

erated after these gases fully burn within a specially designed gas burner. Then energ

y will be saved greatly.

Jinan Joysun Machinery Co., Ltd. par l'exploration et la pratique continue, a mis au point un faible investissement, rendement élevé, de faibles coûts d'exploitation, de haute qualité des produits, des avantages de contrôle de facilité d'utilisation, non seulement des avantages « clairvoyante », mais aussi devant le pied.
Pendant ce temps, China made tyre oil refining machine no polluation particules adjacentes à la vis tourneront avec la rotation de la vis, entraînant la rotation de chaque particule adjacente à la vis avec la rotation de la vis, entraînant une vitesse différente pour chaque particule à l'intérieur de la chambre. Par conséquent, mouvement relatif entre les particules crée de la chaleur qui est nécessaire pendant la fabrication en aidant les protéines à changer correctement, endommager l'huile froide, diminuer la plasticité, diminuer l'huile, l'élasticité, entraînant une haute productivité pétrolière.